Home > English > Bluetooth Devices > KWS-750 Speaker Mirage

KWS-750 Speaker Mirage


 
The following article applies to the speaker system KWS-750.
 
                                        

There is 2 ways to enable 5.1CH in your KWS-750.

1. In your remote control you can press the PRO-LOGIC button as illustrated in point 6 of the diagram below

2. You can press the PRO-LOGIC button in the front part of the KWS-750.
 

3. When the PRO-LOGIC effect is OFF, only the front left/right speaker and Subwoofer will work. Refer to image below when PRO-LOGIC is OFF. Therefore the rear left/right surround speaker and center channel cannot be configured or set.
 
4. To get the full 5.1CH experience, the PRO-LOGIC feature must be set to ON.